SS

Save Setpoint

SS

Command Group: EEPROM

Access:

Network interfaces:

W

CANopen

SDO2004sub05

MODbus

2066,1,10

SS - Save the [setpoint] set-up parameters

PROFIbus

write 28,16,16

Synopsis:
CommandResponse
SetSSOK (or ERR)
Valid forMin. valueMax. value
141.181    
141.184    
141.185    
141.186    
142.181    
142.184    
142.185    
142.186    
143.181    
143.184    
143.185    
151.181    
151.184    
151.186    
152.181    
152.184    
179.181    
64.181    
64.184    
68.181    
68.183    
72.181    
78.183    
88.183    


SS With this command the settings of the setpoints (Sn), the “setpoint hysteresis” (Hn) and the “setpoint action” (An) will be saved in the EEPROM.

See also S0, S1, S2, S3, H0, H1, H2, H3, A0, A1, A2, and A3,