PL9 Feed Target / Flow Setpoint

This is the feed target of the flow weight value.

Available setup range: -999999 … 999999 without decimal point (!).
Please keep in mind, this value works with the PL2 scaling setup and with the PL4 increments per unit setup.

Note: A setup for PL9 equals 1000 means, the feed target is 1 (which is 1.000).
This means, the setup range of the feed target is approx. -1000 to +1000 (-999.999 to +999.999).

See also  LS, LI, GF, GR, GM, PL1, PL2, PL3, PL4, PL5.
And for the DAD:  VF, GD, PL6, PL7, PL8, PL10, PL11, PL12, PL13, PL14, PL15, PL16, PL17, PL18, PL19, PL20, PL21, and AA