PL6 Gain Factor Kp

The proportional-acting controller multiplies the deviation with its gain Kp and returns the result to the analog output without further delay.
The P-controlled circuit is simple and offers medium speed compared to other schemes. The Pcontrolled circuit has always a remaining control deviation.
Depending of your application may be you have to use a P-, PID-, PI- or PD-Controller.
Please find more basic information in the technical literature regarding “control and regulation technology”.

Available setup range: -999999 … 999999 without decimal point (!).
Please keep in mind, this value works internal always with 3 decimals.

Note: A setup for PL6 equals 1000 means, the gain factor Kp is 1 (which is 1.000).
This means, the setup range of the gain factor Kp is approx. -1000 to +1000 (-999.999 to +999.999).

See also  LS, LI, GF, GR, GM, PL1, PL2, PL3, PL4, PL5.
And for the DAD:  VF, GD, PL7, PL8, PL9, PL10, PL11, PL12, PL13, PL14, PL15, PL16, PL17, PL18, PL19, PL20, PL21, and AA