PD6

Delay after pre-fill

PD6

Command Group: Filling	Access:	Network interfaces:
	RW	CANopen	SDO2200sub06
		MODbus	230A,2
PD6 - Delay after pre-fill. Range: 0..65535		PROFIbus	read 6,6 write 6,134

Synopsis:
	Command	Response
Get	PD6	P6:<Value>
Set	PD6 <Value>	OK (or ERR)

Valid for	Min. value	Max. value
141.184	0	65535
142.184	0	65535
143.184	0	65535
151.184	0	65535
151.186	0	65535
152.184	0	65535
64.184	0	65535
78.184	0	65535
88.184	0	65535

PD6 Time during which the tare weight average is calculated. This function allows the correct tare value to be acquired although there may be a lot of vibrations on a (rotating) filling machine. Range: 0 … 65535 msec.