PD2

In-flight correction

PD2

Command Group: Filling	Access:	Network interfaces:
	RW	CANopen	SDO2200sub02
		MODbus	2302,2
PD2 - Correction factor for in-flight value in percent. Range: 0..50.		PROFIbus	read 6,2 write 6,130

Synopsis:
	Command	Response
Get	PD2	P2:<Value>
Set	PD2 <Value>	OK (or ERR)

Valid for	Min. value	Max. value
141.184	0	50
142.184	0	50
143.184	0	50
151.184	0	50
151.186	0	50
152.184	0	50
64.184	0	50
78.184	0	50
88.184	0	50

PD2 Correction factor for the in-flight value in percent. Range: 0 … 50 %.
When a filling cycle has completed then the Actual weight result are compared against the desired fill weight (PD15). The In-Flight Value (PD16) are then corrected with PD2% of the difference.