PD17

Secondary pre-fill value

PD17

Command Group: Filling	Access:	Network interfaces:
	RW	CANopen	SDO2200sub11
		MODbus	2320,2
PD17 - Secondary pre-fill level. Set-point for end of Secondary pre-filling.		PROFIbus	read 6,17 write 6,145

Synopsis:
	Command	Response
Get	PD17	P17:<Value>
Set	PD17 <Value>	OK (or ERR)

Valid for	Min. value	Max. value
141.184	0	999999
142.184	0	999999
143.184	0	999999
151.184	0	999999
151.186	0	999999
152.184	0	999999
64.184	0	999999
88.184	0	262143

PD17 Pre-fill level (in increments). This is the weight value required at the end of the 2nd pre-filling process.
This value must be greater than PD13.