PD10

Zero tolerance

PD10

Command Group: Filling	Access:	Network interfaces:
	RW	CANopen	SDO2200sub0A
		MODbus	2312,2
PD10 - Zero tolerance. Allowable deviation from calibrated zero. Range: 0..99999.		PROFIbus	read 6,10 write 6,138

Synopsis:
	Command	Response
Get	PD10	P10:<Value>
Set	PD10 <Value>	OK (or ERR)

Valid for	Min. value	Max. value
141.184	0	999999
142.184	0	999999
143.184	0	999999
151.184	0	999999
152.184	0	999999
64.184	0	999999
78.184	0	99999
88.184	0	262143

PD10 Load cell zero tolerance check (in increments). This is the allowable deviation from the unloaded load cell zero (no bottle or box). If the unloaded load cell zero is outside this window, the filling process will not start. With this function you can easily check to see if a load cell has been over-loaded.