FT

Firmware Type

FT

Command Group: Calibration	Access:	Network interfaces:
TAC protected	RW	CANopen	SDO2300sub15
		MODbus	2228,2
FT - Set Firmware Type		PROFIbus	read 3,21 write 4,21

Synopsis:
	Command	Response
Get	FT	F:<Value>
Set	FT <Value>	OK (or ERR)

Valid for	Min. value	Max. value
141.181	0	3
141.184	0	3
141.185	0	3
141.186	0	3
142.181	0	3
142.184	0	3
142.185	0	3
142.186	0	3
143.181	0	3
143.184	0	3
143.185	0	3
151.184	0	3
151.186	0	3
152.184	0	3
64.181	0	3
64.184	0	3

FT Select the firmware type.

0 = (ID=1410/1420/1430/6410) Standard (Check-weigher)
1 = (ID=1414/1424/1430/6414) Filling
2 = (ID=1415/1425) Loss-In-Weight or mass-flow
3 = (ID=1416/1426/1430/6410) Drop Filling