AL

Set Analog Low

AL

Command Group: Analog	Access:	Network interfaces:
	RW	CANopen	SDO2100sub03
		MODbus	2104,2
AL - Set the analog low level		PROFIbus	read 18,3 write 31,3

Synopsis:
	Command	Response
Get	AL	L<Value>
Set	AL <Value>	OK (or ERR)

Valid for	Min. value	Max. value
141.181	-999999	999999
141.184	-999999	999999
141.185	-999999	999999
142.181	-999999	999999
142.184	-999999	999999
142.185	-999999	999999
143.181	-999999	999999
143.184	-999999	999999
143.185	-999999	999999
72.181	0	99999
72.184	0	99999

AL Set the analog low level. This command defines the weight value for 4mA analog output. Issuing the AL command without any parameters will return the current low level value in the form L+00000.
Factory default setting: 0.